Meade-instruments TE923W-M Bedienungsanleitung PDF herunterladen (Seite 9)

A. LED INDICATOR

• Flashes once when the remote sensor transmits a reading to the main unit.

• Flashes twice when battery power is low.

B. BATTERY COMPARTMENT

Holds two AA-size batteries

C. RESET

Resets all readings (requires small paper clip.)

D. CHANNEL SWITCH

Selects the desired channel from 1 to 5

E. WALL-MOUNT RECESSED OPENING

Keeps the remote sensor on the wall

Note: Install the batteries and select the channel before mounting the sensor.

Battery installation

• Remove the screws from the battery compartment with a small Phillips screwdriver.

• Set the channel 1 through 5. The switch is located in the battery compartment. Channel 1 is

typically selected if only one remote sensor is being used.

• Install 2 “AA” size alkaline batteries (not included) matching the polarities shown in the battery

battery compartment.

• Replace the battery compartment door and secure the screws.

• Secure the thermo-hygrometer remote sensor in the desired location.

Mounting

• The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on the wall

in vertical position

• Use the wall mount hardware and screws provided when mounting the thermo-hygrometer

sensor on the wall

Placement tips:

• The remote thermo-hygrometer sensor should be placed in the area with a free air circulation

and sheltered from the direct sunlight and an extreme weather conditions.

• Ideally, place the thermo-hygrometer sensor above the natural surfaces (such as a grassy lawn).

• Avoid placing the thermo-hygrometer sensor near sources of heat such as chimneys and heating

elements.

• Avoid any areas collecting and radiating a heat from the sun, such as metal, brick or concrete

structures, paving, patios and decks.

• The international standard for the valid air temperature measurements is 4 feet (1.25meters)

above the ground.

Thermo-Hygrometer Sensor TS34C-M

FEATURES

• Remote data transmission to the main unit via 433 MHz signal

• 328 feet (100 meters) transmission range without interference

• LCD display of measured temperature and humidity

• Five (5) transmission channels selection

• Case can be wall mounted using built-in hanger

MP 42:5 ,80/11/4dmp.R LLEWYENOH )GNE(1MI W329ET 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Meade-instruments TE923W-M Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Thermometer Meade-instruments TE923W-M